Rip Fence The fence should slide easily along the guide bars and always remain in alignment (parallel to sawblade and miter gauge grooves), The alignment is maintained by a spring underneath the fence which bears against the front guide bar To move the fence, loosen the lock handle and grasp the fence with one hand at the front For very close adjustments, grasp the guide bar w{th both hands and move the fence with your thumbs ® Self Aligning Spring Adjustment Checking the Fence Spring 1 Place fence on saw but do not lock it 2 Move the rear end of the fence slightly to the right or left, When you release it, the fence shouid "spring" back to its original position 3 ff it does net, the spring pressure must be increased, 37