Seres RAFTSM N — Seres RAFTSM N Электрический Моторный Косилка 19.5 Л.С. Руководство по эксплуатации и обслуживанию

,_CAUTION: Before performing any service or adjustments: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in =DISENGAGED" position. •Tum ignition key "OFF" and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REMOVE MOWER ° Disconnect front links from deck by removing retainer springs. Raise lift lever to raise suspension arms. Slide mower out from under trac- tor. IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.

TO INSTALL MOWER fight side of tractor. Place attachment clutch in =DISEN- Mower will be easier to remove from the GAGED" position. Move attachment lift lever forward to lower mower to its lowest position. Roll belt off engine pulley. Disconnect clutch rod from clutch lever by removing retainer spring. Disconnect anti-swaybar from chassis bracket by removing retainer spring. Disconnect suspension arms from rear deck brackets by removing retainer springs. Raise attachment lift lever to its highest position. Slide mower under tractor with dis- charge guard to fight side of tractor. Lower lift lever to its lowest position. Install mower in reverse order of removal instructions.

Retainer Spring Suspension Arms Front Link (Both Sides) Springs (Both Sides) Retainer Spring An_-Swaybar 22