Paper-feed assembly 1 Separate the scanner from the printer (see pages 113 through 118) and remove the left side door and back cover (pages 129 and 130). 2 Remove the right plate assembly (see page 160). 3 Remove the ECU pan (see page 164). 4 Unwind the fan and solenoid cables from the cable guides (callout 1) on the paper-feed mechanism. 5 Remove two screws (callout 2) from the paper-feed mechanism. 6 Remove one screw (callout 3) from the paper-sensor PCB assembly. 2 3 2 2 2 1 Figure 90. Removing the paper-feed assembly (1 of 4) 168 Chapter 5 - Removal and replacement EN