Perform the following actions to minimize the possibility of jams: Remove self-stick notes. Remove staples and paper clips. Straighten any curls, folds, or wrinkles in documents before putting them into the document feeder tray. Do not insert any document with glue, correction fluid, or wet ink on it. Do not insert gum-backed paper or labels. Avoid multiple-copy forms. Do not scan originals that are larger or smaller than supported size limitations. See the User Guide for more information. Note To obtain good results, it is important that you use the correct resolution and color settings for your job. See the User Guide located on the product CD for more information.
Media information for the flatbed Use the flatbed scanner for copying and scanning if the media is fragile, thin, thick, or damaged (folded, wrinkled). The flatbed scanner provides the best copy and scan quality. The flatbed has no minimum size and a maximum size of legal. In order to make a copy of a legal-size document, the paper size must be changed using the paper size button. Otherwise, the copy will be cropped to the default paper size. Loading originals to copy or scan Use these instructions to load originals into your HP LaserJet 3300mfp series for copying or scanning. For the best-quality scans and copies, use the flatbed scanner.
See "Selecting originals for the ADF" for guidelines on choosing original documents for scanning and copying. If you purchased an HP LaserJet 3300mfp and want to purchase an ADF, see the User Guide located on the product CD for more information. To load originals onto the flatbed scanner 1 Make sure the ADF is free of media. EN Media information for the flatbed 51