CAUTION Do not use abrasives, acetone, benzene, ethyl alcohol, or carbon tetrachloride on the glass; these can damage it. Do not place liquids directly on the glass. They may seep under it and damage the product. 3 Dry the glass with a chamois or cellulose sponge to prevent spotting. Note Dust might appear on the underside of the glass, but this cannot be cleaned and it has no effect on the copy or scan quality. Cleaning the lid backing Minor debris can accumulate on the white document lid backing located underneath the product’s lid. 1 Turn off the product, unplug the power cord from the electrical socket, and raise the lid. Note If you have a 220V product, turn off the power switch.
2 Clean the white document lid backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. 3 Wash the backing gently to loosen debris; do not scrub the backing. 4 Dry the backing with a chamois or soft cloth. CAUTION Do not use paper-based wipes as these may scratch the backing. 5 If this does not clean the backing well enough, repeat the previous steps using isopropyl alcohol, and then wipe the backing thoroughly with a damp cloth to remove any residual alcohol. 58 Chapter 3 - Maintenance EN