СИ20 — 6.3 Switch on and operation

Block (input 4) prevents the transmission of the counting pulses to the Device input. While this signal is active, counting is blocked. CAUTION The setpoint is specified with the same accuracy as for counting physical values. The multiplier can be set from 0.00001 to 99999. The conversion of counting results (result of multiplying) will be rounded up. The counter also filters the input signals with two filters. The first one filters the signal on the counting input by pulse duration (from 1 to 2500 Hz), the second filters signal on the control inputs of the Device (from 200 to 999999 μs). 32