СИ20 — Appendix A Device parameters

Appendix A. Device parameters Table A.1 – Configurable parameters 47 Parameter Allowed values Comments Default Designa- tion Item Setpoint 000000 – 999999 from 000000 to 99999 000000 oUt Output mode 1 Switched after setpoint. The output is triggered if the number of counted pulses is greater than setpoint value or equal to it. 1 2 Dispenser mode. The output is triggered if the number of counted pulses is in the range from zero to the setpoint value, and the last pulse that arrived at the “Start/Stop” input of the counter was the starting one.

FDP Multiplier decimal point position ———— – ———— ———.- ——.– —.— –.—— -.——— F Multiplier 0,00001 – 99999 from 0.00001 to 99999 1 DP Decimal point position ———— – ———— ———.- ——.– —.— –.——