Table A.1 (continued) 48 Parameter Allowed values Comments Default Designa- tion Item SPM Operation type after reaching setpoint Cnt Continue counting without resetting rStCnt rStCnt* Reset counter and continue counting rStStP Reset counter and stop counting The counter is waiting for the "Start" signal rSt Operation type to "Reset" signal Cont* Reset counter and continue counting Cont StoP Reset counter and stop counting The first impulse that came after the reset to the “Start/Stop” input will be considered as the starting one. NOTICE * These parameters are not available in the Dispenser mode (oUt = 2).
FREQ Frequency of input filter 1 – 2500 Filtering signals at the counting input of the device (from 1 to 2500 Hz) - filter 1. This parameter in the digital signal processing unit of the device is converted to the minimum pulse duration (tmin): 1 tmin ¼ 2 FrEq 2500 Cnt.t Minimum duration of the 200 – 999999 Filtering signals at the control inputs of the device (from 200 to 999999 μs) - filter 2 200