Smart IP43 Charger 5. Select the Smart IP43 Charger from the Device list Local page, under Other devices. 6. VictronConnect will attempt to establish a Bluetooth connection with the Smart IP43 Charger and display the connection progress in the Connecting pop-up dialog box. 7. When attempting to establish a Bluetooth connection with a new/unpaired device, the Bluetooth pairing request pop-up dialog box will appear after a short delay; enter the default PIN code stated on a label located on the side of the charger (or try 000000 if there is no default PIN code label), then select Pair . 8. Select the Settings icon (gear in the top right corner) to access the Settings page. 9.
Select Battery settings to access the Battery settings menu. 10. Expand the Battery preset drop-down menu, then select Built-in preset or alternatively Select preset for more specialised battery types. Page 30 Setup