Chapter 3: Installation Table-Mounting the SmartController EX Motion Controller To table-mount the controller, install two brackets on each side near the bottom of the unit, as shown in the following figure. These brackets must be ordered separately. They do not come with the controller. 4X 40356-00001 R3.6 29.5 12.1 24.1 120.9 391.8 378.6 4X M3 x 6MM BOTH SIDES 16.2 Units are mm 120.9 21.6 Figure 3-3. Table-Mounting the SmartController EX Motion Controller Stack-Mounting Components To stack-mount the SmartController EX Motion Controller and a compatible unit, such as a SmartVision MX vision controller, install two brackets on each side of the units, as shown in the following figure.
These brackets are supplied with compatible units. SmartController EX User’s Guide, 11069-000 Rev. F Page 16 of 92