Chapter 3: Installation 28.1 16.0 120.9 2X 40356-00002 BOTH SIDES 328.9 30.7 8X M3 x 6MM BOTH SIDES 155.8 76.5 186.5 Units are mm Figure 3-4. Stack-Mounting the SmartController EX Motion Controller Memory Card The SmartController EX motion controller is equipped with a Secure Digital ™ (SD) memory card. The SD card is removable, and can be moved to another SmartController EX motion con- troller for testing. The SD card shipped with all systems is factory-configured and installed. The SD card stores the eV+ operating system, application programs, data files, and licenses. Only the factory-supplied SD card will work with the SmartController EX motion controller. NOTE :
This SD card is not compatible with the legacy SmartController CX or CS motion controllers. CAUTION: Use suitable measures for eliminating electrostatic dis- charge during removal and installation of the SD card. This includes, but is not limited to, the use of a grounded wrist strap. SmartController EX User’s Guide, 11069-000 Rev. F Page 17 of 92