Contents Connections Playback Settings Tips Appendix o Low Pass Filter o Auro-Matic 3D Preset Set the low pass filter cutoff frequency of the LFE signal during IMAX playback. Selects the Auro-Matic 3D Preset for fine tuning the Auro-3D experience to specific audio material. 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz / 200 Hz / 250 Hz (Default: 120 Hz) Small: “Small” is ideal for pop and chamber music. Medium (Default) : “Medium” is ideal on jazz music or typical movies and TV shows. 0 You can set this when “IMAX Audio Settings” is set to “Manual”. “Large” is ideal for recordings that were recorded in large spaces (e.g. orchestral recording). o Subwoofer Output Large:
Set the bass signal to be played by the subwoofer during IMAX playback. Movie: “Movie” is ideal for experiencing a large- cinema effect for watching movies (e.g. action movies with big explosions). The low range signal of all speakers is added to the LFE signal output from the subwoofer. The LFE signal and the bass component of each speaker is played. LFE + Main: Speech: “Speech” is ideal for recordings which are mostly dialog (e.g. news broadcast), and that have virtually no inherent spatial information. LFE (Default) : Only the LFE signal is played. 0 You can set this when the sound mode is set to Auro-3D.
0 This cannot be set if the input signal contains Auro-3D signals containing a Height channel. 0 You can set this when “IMAX Audio Settings” is set to “Manual”. Front panel Display Rear panel 174 Remote Index