Contents Connections Playback Settings Tips Appendix Connecting 7.1-channel speakers o Example layout when using surround back speakers o Example layout when using height speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers. This 7.1-channel surround system is basic 7.1-channel system. (Adding surround back speakers to basic 5.1-channel system) FHL FHR FL FR FL FR SW C SW C SL SR SL SR SBL SBR For each speaker connection, refer to the following. 0 “Connecting speakers to the speaker terminals” ( v p. 42) For each speaker connection, refer to the following. 0 “Connecting speakers to the speaker terminals” ( v p.
42) 0 “Connecting an external power amplifier” ( v p. 43) 0 “Connecting an external power amplifier” ( v p. 43) 0 Set “Floor” to “5ch” and “Height Sp” (or “Dolby Sp”) to “2ch” in the menu when connecting in this configuration. ( v p. 211) 0 You can change the Front Height Speakers to any Height/Ceiling/Dolby Atmos Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 213) 0 Set “Floor” to “5ch & SB” in the menu when connecting in this configuration. ( v p. 211) Front panel Display Rear panel 48 Remote Index