Contents Connections Playback Settings Tips Appendix Connecting 9.1-channel speakers o Example layout when using surround back and one set of height speakers o Example layout when using two sets of height speakers FHL FHR FHL FHR RHL RHR FL FR FL FR SW SL SR C SW SL SR C SBL SBR For each speaker connection, refer to the following. 0 “Connecting speakers to the speaker terminals” ( v p. 42) For each speaker connection, refer to the following. 0 “Connecting speakers to the speaker terminals” ( v p. 42) 0 “Connecting an external power amplifier” ( v p. 43) 0 “Connecting an external power amplifier” ( v p.
43) 0 Set “Floor” to “5ch & SB” and “Height Sp” (or “Dolby Sp”) to “2ch” in the menu when connecting in this configuration. ( v p. 211) 0 You can change the Front Height Speakers to any Height/Ceiling/Dolby Atmos Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 213) 0 Set “Floor” to “5ch” and “Height Sp” (or “Dolby Sp”) to “4ch” in the menu when connecting in this configuration. ( v p. 211) 0 You can change the Front Height Speakers and Rear Height Speakers to any Height/Ceiling/Dolby Atmos Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 213) Front panel Display Rear panel 49 Remote Index