Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix Connecting 11.1-channel speakers o Example layout when using surround back and two sets of height speakers z 2 z 2 FR FL FHL FHR RHL RHR FL FR SW SL SR C Power amplifier SBL SBR For each speaker connection, refer to the following. 0 “Connecting speakers to the speaker terminals” ( v p. 42) 0 “Connecting an external power amplifier” ( v p. 43) 0 Set “Floor” to “5ch & SB” and “Height Sp” (or “Dolby Sp”) to “4ch” in the menu when connecting in this configuration. ( v p.

211) FHR FHL RHR RHL C SR SL SBR SBL SW z 1 z 1 z 1 z 1 z 1 You can change the Front Height Speakers and Rear Height Speakers to any Height/Ceiling/Dolby Atmos Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 214) z 2 You can connect the external power amplifier to the Height 2 or Surround back channel instead of the Front channel. Use the “Pre-out” setting in the menu to set the channel connected to the external power amplifier. ( v p. 218) Front panel Display Rear panel 51 Remote Index