Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix o Example layout when using three sets of height speakers FR FL z 3 z 3 FHL FHR RHL RHR TML TMR FL FR SW R S L S C For each speaker connection, refer to the following. 0 “Connecting an external power amplifier” ( v p. 43) 0 “Connecting speakers to the speaker terminals” ( v p. 42) 0 Set “Floor” to “5ch” and “Height Sp” (or “Dolby Sp”) to “6ch” in the menu when connecting in this configuration. ( v p. 211) z 2 z 1 The Top Middle Speaker can be connected to the Surround Back terminal instead of the Surround Back Speaker.

z 2 You can change the Front Height Speakers, Top Middle speaker and Rear Height Speakers to any Height/Ceiling/Dolby Atmos Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 216) z 3 You can connect the external power amplifier to the Height 2 or Top Middle channel instead of the Front channel. Use the “Pre-out” setting in the menu to set the channel connected to the external power amplifier. ( v p. 218) Front panel Display Rear panel 52 Remote Index Power amplifier C SR SL TMR TML FHR FHL RHR RHL SW z1 z1 L FHR FHL RHR RHL 1 SW