Contents Connections Playback Settings Tips Appendix Connecting 7.1-channel speakers: Bi-amp connection of front speakers This system plays back 7.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification. This connection enables back EMF (power returned without being output) from the woofer to flow into the tweeter without affecting the sound quality, producing a higher sound quality. You can connect speakers for up to 9-channels for MAIN ZONE.
When you connect speakers for 8 or more channels, the output speakers automatically switch according to the input signal and sound mode. FHL FHR FL FR (Bi-Amp) SW C SL SR SBL SBR NOTE 0 When making bi-amp connections, be sure to remove the short-circuiting plate or wire between the speaker’s woofer and tweeter terminals. z 1 The speaker terminals for bi-amp connections to the front speakers vary depending on the MAIN ZONE layout. Refer to “Amp Assign” - “Bi-Amp”. ( v p. 217) z 2 The height speakers, ceiling speakers and Dolby Atmos Enabled speakers can be connected to the HEIGHT1 speaker terminals. Set the speaker to be connected from “Height” - “Layout” in the menu. ( v p.
213) Front panel Display Rear panel 54 Remote Index z1 z1 SW C SR SL SBR SBL FHR FHL z2 z2 (R) (L) q w q w FR FL