Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts 5 Use cursor Left/Right to select “FM” or “AM”, then press ENTER. 1 Connect the antenna. (“Connecting FM/AM antennas” ( v p. 68)) 2 Press TUNER to switch the input source to “Tuner”. AM: When listening to an AM broadcast. 6 Press TUNE + or TUNE – to select the station you want listen to. Scanning is performed until it finds an available radio station. When it finds a radio station, it stops the scan automatically and tunes in. FM: When listening to an FM broadcast.
G TV screen H Tuner Now Playing STEREO AUTO 0 The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default setting is “Auto”. You can also use “Direct Tune” to tune in by entering the frequency directly. In “Auto” mode, you cannot tune in to radio stations if the reception is not good. If this is the case, then use the “Manual” mode or “Direct Tune” mode to tune in. Tune Preset Option OPTION 01 FM 92 . 10MHz 3 Press OPTION. The option menu screen is displayed. 4 Use cursor Up/Down to select “FM/AM”, then press ENTER.
This displays the reception band input screen. Front panel Display Rear panel 92 Remote Index CH 1 FM 92.10 MHz Operation buttons Function TUNE +, – Selects the radio station (up/down) CH/PAGE ml Selects preset radio stations Cursor Up/Down Selects the radio station (up/down) Cursor Left/Right Selects preset radio stations