Sony — Owner's Manual - Marantz

Contents Connections Playback Settings Tips Appendix o Operations accessible through the option menu Tuning in by entering the frequency (Direct Tune) 0 “Tuning in by entering the frequency (Direct Tune)” ( v p. 93) 0 “Tuning in to stations and presetting them automatically (Auto Preset Memory)” ( v p. 94) 0 “Changing the tune mode (Tune Mode)” ( v p. 94) You can enter the receiving frequency directly to tune in. 1 Press OPTION when the input source is “Tuner”. 0 “Presetting the current broadcast station (Preset Memory)” ( v p. 95) The option menu screen is displayed. 2 Use cursor Up/Down to select “Direct Tune”, then press ENTER. The screen that lets you enter the frequency is displayed.

3 Use cursor Up/Down to select a number, then press cursor Right. 0 “Specify a name for the preset broadcast station (Preset Name)” ( v p. 96) 0 “Skipping preset broadcast stations (Preset Skip)” ( v p. 97) 0 “Adjusting the audibility of dialog and vocals (Dialog Enhancer)” ( v p. 120) 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” ( v p. 121) 0 If cursor Left is pressed, the immediately preceding input is cancelled. 4 Repeat step 3 and enter the frequency of the radio station you want to hear. 5 When setting is completed, press ENTER. 0 “Adjusting the tone (Tone)” ( v p.

122) 0 “Changing the strength of Tactile Transducer according to the input source (Tactile Transducer)” ( v p. 124) 0 “Adjusting audio delay (Audio Delay)” ( v p. 123) 0 “Displaying your desired video during audio playback (Video Select)” ( v p. 125) 0 “Playing the same music in all zones (All Zone Stereo)” ( v p. 126) The preset frequency is tuned in. 0 “Changing the speaker settings to match the listening environment (Speaker Preset)” ( v p. 127) Front panel Display Rear panel 93 Remote Index