Downloaded from https://www.everyspec.com MIL-HDBK-883(AT) 2.2. ? ~. Capability can be determined only after the process is in statistical control. A procxma h said to be capable when the procem q..rage plus and minus the 3-ai~ spread of the distribution of individuals (X~3~ is contained within the specification tolerance (variables data), or whenat least 99.73 percent (%) of individuals are within specification (attributez3data). Bfforts to improve capability muat continue, however. consistent with the operational fiiloeophy of never-ending improvement in quality and productivity.
2.2.8 ~ A simple tool for individual or group problem-solving that UMB a graphic-descripti& of the various process elements to analyze potential sources of procea8 variation. Also called “fishbone diagram” (after its appearance) or “Ishikawa diagram” (after its developer). 2.2.9 The line on a control chart that represents the average or median value-of the items being plotted. 2.2.10 ~. A distinguishing feature of a proceaa or its output on which variablea or attributes data can be collected. 2-2-11 bwuumaO- A source of variation that affects all the individual values of the process output being studied. In control chart analyais it appaara aa part of the random procea8 variation. 2.2.12 ~.
Units of output produced in succession; a basis for selecting subgroup samples. 2.2.13 ~. A graphic representation of a characteristic of a process characteristic showing plotted values of S- statistic gathered from that characteristic, a central line, and one or two control limits. Its primary function h to discern azmignable f- random causes of vartition. It haa two b@lSiCuses: aa a judgement to determine if a process has been operating in statistical control, and as an operation to aid in maintaining statistical control. 2.2.14 A line (or lines) on a control chart ueed as a baaia for judging the si&ificance of the variation from subgroup to subgroup.
Variation beyond a control limit is evidence that special causea are affecting the prooeaa. Control limits are calculated from pmoeOa data and are not to be confused with engineering specifications. 2.2.15 A past-oriented strategy that attempts to identify unacceptable output after it has been produced and then separate it f- the good output (ace also prevention).