MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF

Downloaded from https://www.everyspec.com lfIkHDBK-6$3(AT) 2.2.56 ~. A value calculated from or based upon sample data (e.g., a subgroup average or range) used to make inferences about the process that produced the output frun which the sample came. 2.2.57 . The condition describing a process from which all special causes of variation have been eliminated and only comon cauaes remain; evidenced on a control chart by the absence of points beyond tbe control limits and by the absence of non-random pattern8 or trends within the control limits. 2.2.58 ~ .

The use of statistical techniques such as control charts to analyze a process or its out-s so as to take a~iate actions to achieve and maintain a state of statistical control and to improve the process capability. 2.2.59 ~. One or more events or measurementa used to analyze the performance of a proce8a. Rational subgroups are usually chosen so that the variation represented within each subgroup is as small as feasible for the process (representing the variation from common causes), and so that any changes in the process performance (i-e., special causes) will appear as differences between subgroups.

Rational subgroups are typically made up of consecutive pieces, although random samples are sometimes used. 2.2-W ~. -Paiteof smcificationa, Plans, drawings, standards, and such other data necessary to properly describe material for acquisition purposes. 2-2-61 ~- Takti action appropriate fora special cause when in fact the process haa not changed. ~-z-w ~- Not taking appropriate action when in fact the process is affected by special causes. 2.2.63 ~w!i ~ . Quantitative data where measurements are used for analysis. Examples include:

the diameter of a bearing journal in millimeters, the closing effort of a door in kilograms, the concentrati~n of ele~trolyte in ~rcent, or the torque of a fastener in newton-meters. X and R, X and s, median and individuals control charts are used for variable data. (See also attributes data). 2.2.64 Yaziw&u. The inwitable differences among individual outputs of a process. The aoumea of variation can be grouped into two major classes: comon causes and special causea. 9