Downloaded from https://www.everyspec.com MI&HDBK-683(AT ) 2.3 .. A2 A multiplier of ~ ueed to calculate the control limits for aver4ges. A3 A multiplier of = used to calculate the control limits for averages. &z, B3 Multipliers of ~uaed to calculate the lower and -r control limits, m~tivelyp for wple dandard deviatlon8 c The number of nonconfomities in a saOple. z . The average number of nonconformities in samples of constant size n. C4 A divisor of a used to estimate the process standard deviation. A capability index that indicatea potential process capability, defined as: total tolerance/6@. GP w The Capability Index, defined as: 2kI~3.
& A divisor of ~ used to estimate the process standard deviation. k, Ih Multipliers of~ used to calculate the lower and u-r control limits, rea~tively, for range. Gage redatability and reproducibility (gage error). k The number of subgroups being used to calculate control limits. L&L The lower control limits; &, ILLR, ILL, etc., are, respectively, the lower control limits for averages, ranges, proportion nonconforming, etc. m kuer control limit for average8. Lower control limit for ranges. Lower control limit for proportion nonconforming. ML The lower engineering specification llmit. 10