Downloaded from https://www.everyspec.com t’lIL-KDBK-683(AT ) If the supplier is a potential source for complex systems which would require him to select hie own control pointe for statistical monitoring. he thiaapproach toinapection and teetplamking tothaaladit should p~ team. The audit team should be prepared to establish a follow-on schedule for finalktion of the inspection and teat parameters to be mnitOZWd during the mmWement . P Thi8 folkwon activity should be integrated witi the Gwezzment quality asaur~ activity, U CWCue8ed in 5.5. 5-5 ~- ~ wa~=tion ~ti of W audit ar9 ~ized from the Checklists oonpleted during tb plant tsar d the joint lwview.
team ChdI’’MXl ehouhi bring hia team together after completing the prooeaa audit and dOcUWnt the apeoific actiono reguired to correct unacceptable items using the Audit Corrective Action &amary Report (SW figure 16-5). The audit team should report the overall mwults of the plant tour as acceptable if 9(X or more of the elements audited are acceptable. If less than 90% are acceptable, the audit team should report that corrective aotion is required and require that all it- in the Audit Corrective Action Sulrmary Report be thoroughly discussed with the su~lier.
After a schedule for corrective action is established, a follow-up audit should be conducted and the results of this new waluation should be used to dete~ine acceptability. If the uverall results are not acceptable, the audit team should consider a limited qualification for the supplier. It may be possible to a~ individual facilities or individual part numbers or procemea even though the overall system requires further work. 5-6 ~- The audit team-s final report should pruvide both the supplier and management with a sumary of the plant tour resulte and the action items fmm the joint review.
The report should be essentially c~leted before the team leaves the audit site with only final typing and proofreading required at the audit team-a home facility. The report should be signed by all team members and presented to appropriate Government management with reconmnendatlone for follow-up. The management review team should formally accept the teem-a rec~ndations or modify them as needed and the final results conmunicated to the supplier through ~X or if it-s a prime contractor audit, through the appropriate Government office. 5-7 ~.
~e action items resulting from the plant tour and joint review with the supplier should be scheduled for followup reviews on a frequency consistent with the imprtance of the account . A supplier who is delivering critical assemblies on a high cost contract could be subject to a corrective action review before each delivery or weekly. Suppliers still in the negotiation stage of a contract may be able to conduct a monthly review of status. It ia preferable for the audit team to establish the frequency and intensity of follow-up action with the -lier tiing the audit, but management maY change these parameters based on knowledge not available to the team. 63