Chapter 3: System Interface HDD Channel activity for all HDDs. This light indicates SAS/SATA drive activity on the 1012G-MTF when flashing. Power Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. 3-4 Drive Carrier LEDs Each drive carrier has two LEDs for its SATA drives. Green: When illuminated, the green LED on the drive carrier indicates drive activity. A connection to the backplane enables this LED to blink on and off when that particular drive is being accessed. Red: The red LED to indicate a drive failure. If one of the drives fails, you should be notified by your system management software.
Please refer to Chapter 6 for instructions on replacing failed drives. 3-3