A+ Server 1122GG-TF User's Manual SGPIO The T-SGPIO1/ T-SGPIO2 (Serial General Purpose Input/Output) headers provide a bus between the SATA controller and the backpane to provide SATA enclosure man agement functions. Connect the appropriate cable from the backplane to the T-SGPIO1 header to utilize SATA management func tions on your system. Note: NC indicates no connection. Power SMB (I 2 C) The Power System Management Bus ( I2 C) connector (JPI2C1) monitors the power suppply, fan and system temperatures. See the table on the right for pin definitions. Chassis Intrusion A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you of a chassis intrusion.
IPMB A System Management Bus header for the IPMI slot is located at IPMB. Connect the appropriate cable here to use the IPMB I2C connection on your system. Overheat LED Connect an LED to the JOH1 header to pro vide warning of chassis overheating. See the table on the right for pin definitions.
5-14 SGPIO Header Pin Definitions (T-SGPIO1/TSGPIO2) Pin# Definition Pin # Definition 1 NC 2 NC 3 Ground 4 Data 5 Load 6 Ground 7 NC 8 NC Power SMB I2C Pin Definitions (JPI2C) Pin# Definition 1 Clock 2 Data 3 PWR Fail 4 Ground 5 +3.3V Chassis Intrusion Pin Definitions (JL1) Pin# Definition 1 Battery voltage 2 Intrusion signal IPMB Pin Definitions Pin# Definition 1 Data 2 Ground 3 Clock 4 No Connection Overheat LED Pin Definitions (JOH1) Pin# Definition 1 3.3V 2 OH Active