Supermicro A+ Server 1122GG-TF — Supermicro A+ Server 1122GG-TF User's Manual PDF Download

A+ Server 1122GG-TF User's Manual Peripheral Drive Installation Installing or Replacing a Peripheral Drive 1. Unplug the main power cords to the chassis. 2. Unplug the power and data cables from the motherboard and/or backplane to any drive you are replacing. 3. If you are adding a new drive : Remove the dummy tray from the drive bay The mini-bezel can be removed by pulling out the hard drive beneath the drive bay, then pulling the mini-bezel forward. If you are replacing a drive : Locate the locking tab at the rear (left hand side when viewed from the front) of the peripheral drive. Push the tab toward the drive and push the drive unit out the front of the chassis. 4.

Insert the new drive unit in the slot until the tab locks in place. 5. Reconnect the data and power cables. 6. Replace the chassis cover and power up the system. 6-6