Supermicro A+ Server 1122GG-TF — Supermicro A+ Server 1122GG-TF User's Manual PDF Download

Chapter 6: Advanced Chassis Setup 6-4 Installing the Air Shroud Air shrouds concentrate airflow to maximize fan efficiency. The SC118G chassis air shroud does not require screws to set up Note: When installilng two GPU cards, the MCP-310-81803-0B air shroud must be used. This air shroud is sold separately. Information is available on the Supermicro Web site at http://www.supermicro.com. Installation of the MCP-310-81803-0B air shroud is identical to the installation of a standard air shroud, which is described below. Installing the Air Shroud 1. Position the air shroud in the chassis as illustrated below. 2. Align the notch (A) on the air shroud with the pin (B) on the riser card bracket. 3.

Slide the pin (B) into the back of the notch (A) 4. Lower the front of the air shroud over the fan housing, sliding the front notches (C) over the pins on the fan housing (D). Figure 6-5. Installing the Air Shroud 1 C 1 A 1 D 1 B 1 D 6-7