Supermicro A+ Server 1122GG-TF — Supermicro A+ Server 1122GG-TF User's Manual PDF Download

A+ Server 1122GG-TF User's Manual Figure 6-8. Left Riser Card Bracket Installing a Low-Profile Card 2 Screwdriver Icon 4 5 3 Installing an Expansion Card in the Center Installing a Low Profile Expansion Card 1. Power down the system and remove the chassis cover. 2. Remove the left riser card bracket from the chassis by unscrewing only those 3. Install the riser card on the bracket using the two screws provided. screws indicated by the screwdriver icon. Lift the bracket from the chassis. 4. Open the latch on the end of the bracket. 5. Install the expansion card by sliding the card into the slot in the riser card and close the bracket latch over the end of it. 6.

Reseat the riser card bracket assembly while placing the riser card into the expansion slot on the motherboard. 7. Secure the bracket to the chassis with the screws. 8. Replace the chassis cover and power up. 6-10