Supermicro A+ Server 1122GG-TF — Supermicro A+ Server 1122GG-TF User's Manual PDF Download

Chapter 6: Advanced Chassis Setup 6-7 Power Supply The SC118G chassis includes a 1400 Watt power supply. This power supply is auto-switching capable. The power supply automatically sense and operates at a 100v to 240v input voltage. Power Supply Replacement If the power supply unit fails, the system will shut down and you will need to replace the unit. Replacement units can be ordered directly from Supermicro (see contact information in the Preface). As there is only one power supply unit in the SC118G chassis, power must be completely removed from the server before removing and replacing the power supply unit. Removing/Replacing the Power Supply (Figure 6-6) 1.

Power down the server and unplug the power cord. 2. Push the release tab on the front of the power supply. 3. Lift the handle of the power supply. 4. Pull the power supply out of the power supply bay. 5. Push the new power supply module into the power bay until it clicks into the locked position. 6. Plug the AC power cord back into the module and power up the server. Figure 6-14. Removing/Replacing the Power Supply 1 2 1 3 1 4 6-15