Chapter 7: BIOS/Setup Super IO Configuration The Super IO Configuration includes the following items: BIOS Serial Port 1 Address This option specifies the base I/O port address of serial port 1. The set- tings for this item include Disabled, 3F8 and 3E8 and 2E8. Select the de- sired setting and then press . Serial Port 1 IRQ This option specifies the Interrupt Request address of serial port 1. The settings for this item include Disabled, 4 and 3. Select the desired setting and then press . Serial Port 2 Address This option specifies the base I/O port address of serial port 2. The settings for this item include Disabled, 2F8 , 3E8 and 2E8. Select the desired setting and then press .
4-5 BIOS SETUP UTILITY Advanced Configure Nat 317 Serial Port(s)and Parallel P ↔ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit Serial Port1 Address [3F8] Serial Port1 IRQ [4] Serial Port2 Address [2F8] Serial Port2 IRQ [3] Parallel Port Address [378] Parallel Port IRQ [7] Parallel Port Mode [ECP] ECP Mode DMA Channel [3] V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.