S UPER P3TDLR User's Manual Serial Port 2 IRQ This option specifies the Interrupt Request address of serial port 2. The settings for this item include Disabled, 4 and 3 . Select the desired setting and then press . Parallel Port Address This option specifies the I/O address used by the parallel port. The settings for this item include Disabled, 378 , 278 and 3BC. Select your setting and then press "Enter". Parallel Port IRQ This option allows the user to set the Parallel Port IRQ. The settings for this item include 5 and 7 . Parallel Port Mode This option specifies the parallel port mode. The settings for this item include Normal, Bi-directional, EPP and ECP .
BIOS ECP Mode DMA Channel This option allows the user to set the setting for the ECP Mode of the DMA Channel. The settings for this item include 0 , 1 and 3. IDE Configuration Onboard PCI IDE Controller This option allows the user to enable or disable the integrated IDE Control- ler. The settings include Disabled and Both . Select "Disabled" to disable the Integrated IDE Controller. Select "Both" to enable both Primary and Sec- ondary IDE Controllers. 4-6