Supermicro P3TDLR — Supermicro P3TDLR Motherboard User's Manual PDF (Revision 1.0a)

Chapter 7: BIOS/Setup ISA IO Cycle Delay This settings for this option are Full Delay, 1.5 BCLK, 2.5 BLCK and 3.5 BLCK. MPS 1.4 Support The settings for this option are Enabled and Disabled. 4-6 PCI PnP Setup Choose PCI/PnP Setup from the AMIBIOS Setup main menu. All PCI/PnP options are described in this section. The PCI/PnP Setup screen is shown below. BIOS Plug & Play OS Choose the No setting for computers that do not meet the Plug and Play specifications, which will allow the BIOS to configure all the devices in the system. Choosing the Yes setting lets the operating system configure PnP devices that are not required for boot up (if the system has a PnP operating system).

The operating system would have the ability to change interrupt, 4-17 BIOS SETUP UTILITY Main Advanced Chipset PCIPnP Power Boot Security Exit Plug & Play O/S [No] Reset Config Data [No] PCI Latency Timer [64] Allocate IRQ to VGA [Yes] Palette Snooping [Disabled] PCI IDE BusMaster [Disabled] OffBoard PCI/ISA IDE Card [Auto] USB Controller [Enabled] PCI Slot-1 IRQ preference [Auto] PCI Slot-2 IRQ preference [Auto] Onboard VGA IRQ preference [Auto] Onboard LAN1 IRQ preference [Auto] Onboard LAN2 IRQ preference [Auto] PCI Slot-3 IRQ preference [Auto] PCI Slot-4 IRQ preference [Auto] Onboard SCSI IRQ preference [Auto] No: lets the BIOS configure all the devices in the system. Yes:

lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system. ↔ Select Screen ↑↓ Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit V02.03 (C)Copyright 1985-2000, American Megatrends, Inc.