S UPER P3TDLR User's Manual I/O, and DMA settings. Set this option if the system is running Windows 95®, Windows 98® or Windows 2000®. Several other operating systems are also PnP-aware. Reset Configuration Data Choosing the Yes setting will cause the PnP configuration data in the BIOS to be cleared on the next boot up. Choosing the No setting does not force PnP data to be cleared on the next boot. PCI Latency Timer This option specifies the latency timing of the PCI clocks for all PCI devices. Settings include 32, 64 , 96, 128, 160, 192, 224 and 248 PCI clocks. Allocate IRQ to PCI VGA This option lets you allocate an interrupt request (IRQ) to the PCI VGA adapter card (if used).
The settings are Yes and No. Palette Snooping When enabled, this option informs PCI devices that an ISA graphics device is installed. The settings are Disabled and Enabled. This does not neces- sarily indicate a physical ISA adapter card. The graphics chipset can be mounted on a PCI card. Always check with your adapter card manuals first, before modifying the default settings in the BIOS. BIOS PCI IDE BusMaster The settings for this option are Disabled and Enabled. Enable to specify that the IDE controller on the PCI bus has bus mastering capabilities. OffBoard PCI/ISA IDE Card The settings for this option are Auto, PCI Slot 1, PCI Slot 2, PCI Slot 3, PCI Slot 4, PCI Slot 5, and PCI Slot 6.
USB Function The settings for this option are Disabled and Enabled . Disabled prevents the use of the USB ports and Enabled allows the use of the USB ports. 4-18