Supermicro SUPER P4DE8/P4DEI/P4DEE — Supermicro SUPER P4DE8/P4DEI/P4DEE User Manual: Full Guide & Specs PDF

S UPER P4DE8/P4DEI/P4DEE User’s Manual 2-5 Connecting Cables Primary ATX Power Connection 24-pin ATX Power Supply Connector (J5) Pin Definitions The power supply connector (at J5) meets the SSI (Superset ATX) 24-pin specification, however it also supports a 20-pin power sup- ply connector. Make sure that the orientation of the PS connector is correct. See the table on the right for pin definitions. 8-Pin +12v Po w er Supply Connector (J7) Secondary ATX Power Connections In addition to the Primary ATX power connector (above), two secondary 12v power connectors (an 8-pin at J7 and a 4-pin at J6) must also be connected to your power supply. See the tables on the right for pin definitions.

Required connection 4-Pin +12v Po w er Supply Connector (J6) Required connection Power LED PW R_LED Pin Definitions (JF1) The Power LED connection is lo- cated on pins 15 and 16 of JF1. Refer to the table on the right for pin definitions. HDD LED The HDD LED (for IDE Hard Disk Drives) connection is located on pins 13 and 14 of JF1. Attach the IDE hard drive LED cable to these pins to display disk activity. Refer to the table on the right for pin definitions.

(IDE) HDD L ED Pin Definitions (JF1) 2-8 Pin Number Definition Pin Number Definition 13 +3.3V 14 -12V 15 COM 16 PS ON# _ 17 COM 18 COM 19 COM 20 Res(NC) 21 +5V 22 +5V 23 +5V 24 COM 1 +3.3V 2 +3.3V 3 COM 4 +5V 5 COM 6 +5V 7 COM 8 PWR OK _ 9 5VSB 10 +12V 11 +12V 12 +3.3V Pins Definition 1 thru 4 5 thru 8 Ground +12v Pins Definition 1 & 2 3 & 4 Ground +12v Pin Number Definition 15 16 +5V Control Pin Number Definition 13 14 +5V HD Active