Chapter 2: Installation L2 LED L2 LED Pin Definitions (JF1) The L2 (Network Interface Control- ler for LAN2) LED connection is lo- cated on pins 9 and 10 of JF1. At- tach a cable to display network activity for LAN2. Refer to the table on the right for pin defini- tions. L1 LED L1 LED Pin Definitions (JF1) The L1 (Network Interface Control- ler for LAN1) LED connection is lo- cated on pins 11 and 12 of JF1. Attach a cable to display network activity for LAN1. Refer to the table on the right for pin defini- tions. Overheat LED (OH) O verheat (O H) L ED Pin Definitions (JF1) Connect an LED to the OH connec- tion on pins 7 and 8 of JF1 to pro- vide advanced warning of chassis overheating.
Refer to the table on the right for pin definitions. Power Fail LED Pow er Fail LED Pin Definitions (JF1) The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table on the right for pin definitions. Reset Reset Pin Definitions (JF1) The Reset connection is located on pins 3 and 4 of JF1. Attach it to the hardware reset switch on the computer case. Refer to the table on the right for pin defini- tions. 2-9 Pin Number Definition 9 10 +5V GND Pin Number Definition 11 12 +5V GND Pin Number Definition 7 8 +5V GND Pin Number Definition 5 6 Control GND Pin Number Definition 3 4 Reset Ground