Supermicro SUPER P4DE8/P4DEI/P4DEE — Supermicro SUPER P4DE8/P4DEI/P4DEE User Manual: Full Guide & Specs PDF

S UPER P4DE8/P4DEI/P4DEE User’s Manual LAN2 Enable/Disable LAN2 Enable/Disable Jum per Settings (JPL2) Change the setting of jumper JPL2 to enable or disable the LAN2 port on the motherboard. See the table on the right for jumper settings. The default setting is Enabled. SCSI Termination Enable/ Disable (P4DE8) SCSI Channel T erm ination Enable/Disable Jum per Settings (JPA1, JPA2) Jumpers JPA1 and JPA2 allow you to enable or disable termination for the SCSI connectors. Jumper JPA1 controls SCSI channel A and JPA2 is for SCSI channel B. The normal (default) setting is open to enable (teminate) both SCSI channels. See the table on the right for jumper set- tings.

SCSI Enable/Disable (P4DE8 only) SCSI Enable/Disable Jum per Settings (JPA3) The SCSI Enable/Disable jumper at JPA3 allows you to enable or dis- able the onboard SCSI. The nor- mal (default) position is on pins 1- 2 to enable SCSI. See the table on the right for jumper settings. 2-16 Jumper Position Definition Pins 1-2 Pins 2-3 Enabled Disabled Jumper Position Definition Open Closed Enabled Disabled Jumper Position Definition Pins 1-2 Pins 2-3 Enabled Disabled