Supermicro SBB 937R-E2JB — Supermicro SBB 937R-E2JB User Manual: Comprehensive Guide for System Integrators

Chapter 1: Introduction system overheat and power supply failure. Each set of LEDs are associated with the node/serverboard on the same side of the chassis. A single power button is located on the right side control panel. When pressed, both nodes will power on or off. Cooling System The SC937 chassis has six fans at the front of each expander, which consists of three sets of two 4-cm counter-rotating fans. This counter-rotating action works to dampen vibration levels while generating exceptional airfl ow. 1-4 SBB: Storage Bridge Bay The 937R-E2JB Super SBB was designed to function as a fully redundant, fault- tolerant "cluster-in-a-box" JBOD system.

The support for 16 3.5" hot-swap HDDs has been expanded to support cascading with the SBB JBOD 937R-E2JB confi guration. The Super SBB provides hot-swappable trays for the BMB-937-JB expanders. Equipped with 700W (Gold Level) high-effi ciency redundant power supplies and redundant cooling fans, the 937R-E2JB is a high-available, high-reliability JBOD storage system at a competitive price. 1-3