Supermicro SBB 937R-E2JB — Supermicro SBB 937R-E2JB User Manual: Comprehensive Guide for System Integrators

Chapter 3: System Interface Chapter 3 System Interface 3-1 Overview There are several LEDs on two control panels as well as others on the drive carriers to keep you constantly informed of the overall status of the system as well as the activity and health of specifi c components. A main power button is also located on the right side (only) control panel. 3-2 Control Panel Button Power The single button located on the right control panel is the power on/off button. Depressing this button will either power both nodes on or off.Turning off system power with this button removes the main power but keeps standby power supplied to the system.

3-3 Control Panel LEDs The two control panels located on the front of the chassis have several LEDs. With the exception of the power fail LED, these LEDs provide you with critical information related to the node on the same side of the chassis. This section explains what each LED indicates when illuminated and any corrective action you may need to take. Power Fail Indicates a power supply module has failed. The second power supply module will take the load and keep the system running but the failed module will need to be replaced. Refer to Chapter 5 for details on replacing the power supply. This LED should be off when the system is operating normally. 3-1