Supermicro A+ Server 1012A-MTF — Supermicro A+ Server 1012A-MTF — User's Manual

A+ Server 1012A-MTF User's Manual DIMM Module Population Configuration For memory to work properly, follow the tables below for memory installation: Note 1 : Due to OS limitations, some operating systems may not show more than 4 GB of memory. Note 2 : Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. 5-6 Memory Population for Optimal Performance # DIMMS Channel 1 Channel 2 2 DIMMs DIMM1A DIMM2A 4 DIMMs DIMM1A DIMM2B DIMM2A DIMM2B Per Channel DIMM Populations Options DIMM Type DIMM A DIMM B Max. MHz, 1.5V DIMMs Max. MHz, 1.35V DIMMs Max.

GB/ Channel UDIMM SR or DR Empty 1600 MHz 1333 MHz 8 GB SR SR 1600 MHz 1333 MHz 4 GB DR DR 1333 MHz 1066 MHz 16 GB Possible System Memory Allocation & Availability System Device Size Physical Memory Available (4 GB Total System Memory) Firmware Hub flash memory (System BIOS) 1 MB 3.99 GB Local APIC 4 KB 3.99 GB Area Reserved for the chipset 2 MB 3.99 GB I/O APIC (4 Kbytes) 4 KB 3.99 GB PCI Enumeration Area 1 256 MB 3.76 GB PCI Express (256 MB) 256 MB 3.51 GB PCI Enumeration Area 2 (if needed) - aligned on 256 MB boundary- 512 MB 3.01 GB VGA Memory 16 MB 2.85 GB TSEG 1 MB 2.84 GB Memory available for the OS & other applications 2.84 GB