Supermicro A+ Server 1012A-MTF — Supermicro A+ Server 1012A-MTF — User's Manual

Chapter 5: Advanced Motherboard Setup 5-5 PCI Expansion Cards A riser card is used to support one standard size (full height full length) PCI expan­ sion card. Installing a PCI Expansion Card 1. Confirm that you have the correct riser card for your chassis model and the expansion card includes a standard bracket. 2. Power down the systems and remove the chassis cover. 3. Install the riser card by sliding card into the appropriate slot in the mother­ board. 4. Choose the PCI slot shield in which to place the expansion card. 5. In that slot, open the PCI slot shield lever and slide the shield sideways. From inside the chassis, remove the PCI slot shield. 6.

Insert the expansion card into the slot on the riser card while aligning the expansion card shield with the opening in the rear of the chassis. 7. Close the shield lever. Close the chassis cover and power up. 5-7