Chapter 5: Advanced Serverboard Setup Figure 5-3. DIMM Installation DDR2 To Install: Insert module vertically and press down until it snaps into place. Pay attention to the bottom notches. To Remove: Use your thumbs to gen- tly push each re- lease tab outward to free the DIMM from the slot.
5-9 Possible System Memory Allocation & Availability System Device Size Ph (4 ysical Memory Remaining GB Total System Memory) Firmware Hub fl ash memory (System 1 MB 3.9 BIOS) 9 Local APIC 4 KB 3.9 9 Area Reserved for the chipset 2 MB 3.9 9 I/O APIC (4 Kbytes) 4 KB 3.9 9 PCI Enumeration Area 1 256 MB 3.7 6 PCI Express (256 MB) 256 MB 3.5 1 PCI Enumeration Area 2 (if needed) 512 MB 3.0 -Aligned on 256-MB boundary- 1 VGA Memory 16 MB 2.8 5 TSEG 1 MB 2.8 4 Memory available to System BIOS & 2.8 OS applications 4