S UPER S ERVER 1015B-M3 User's Manual Chassis Intrusion The Chassis Intrusion header is des- ignated JL1. Attach an appropriate cable from the chassis to inform you of a chassis intrusion when the chas- sis is opened Wake-On-LAN The Wake-On-LAN header is desig- nated JWOL on the serverboard. See the table on the right for pin defi ni- tions. You must also have a LAN card with a Wake-On-LAN connector and cable to use this feature. Wake-On-Ring The Wake-On-Ring header is desig- nated JWOR. This function allows your computer to receive and be "awak- ened" by an incoming call when in the suspend state. See the table on the right for pin defi nitions.
You must also have a WOR card and cable to use this feature. External Speaker/Internal Buzzer On the JD1 header, pins 1-4 are for an external speaker and pins 3-4 are for the internal speaker. If you wish to use an external speaker, connect it to pins 1-4 to. If you wish to use the onboard speaker, you should close pins 3-4 with a jumper. LAN1/2 (Ethernet Ports) Two Ethernet ports (designated JLAN1 and JLAN2) are located beside the VGA port on the I/O backplane. These ports accept RJ45 type cables.
5-16 Chassis Intrusion Pin Defi nitions (JL1) Pin# Defi nition 1 Intrusion Input 2 Ground Wake-On-LAN Pin Defi nitions (JWOL) Pin# Defi nition 1 +5V Standby 2 Ground 3 Wake-up Wake-On-Ring Pin Defi nitions (JWOR) Pin# Defi nition 1 Ground (Black) 2 Wake-up Speaker Connector (JD1) Pin Setting Defi nition Pins 3-4 Internal Speaker Pins 1-4 External Speaker