S UPER S ERVER 1015B-M3 User's Manual Port B. The options are Normal and IR (for an infrared device). Base I/O Address This setting allows you to select the base I/O address for Serial Port B. The options are 3F8, 2F8 , 3E8 and 2E8. Interrupt This setting allows you to select the IRQ (interrupt request) for Serial Port B. The options are IRQ3 and IRQ4. Parallel Port This setting allows you to decide how the parallel port will be controlled. The options are Enabled (user defi ned), Disabled and Auto (BIOS-or OS- controlled). Base I/O Address Select the base I/O address for the parallel port. The options are 378 , 278 and 3BC.
Interrupt This setting allows you to select the IRQ (interrupt request) for the parallel port. The options are IRQ5 and IRQ7 . Mode This feature allows you to specify the parallel port mode. The options are Output only, Bi-Directional, EPP and ECP . DMA Channel This item allows you to specify the DMA channel for the parallel port. The options are DMA1 and DMA3 . Floppy Disk Controller This setting allows you to decide how the fl oppy disk controller will be controlled. The options are Enabled (user defined), Disabled, and Auto (BIOS and OS controlled). 7-14