S UPER S ERVER 1018D-73MTF User's Manual Memory Population Guidelines Please follow the table below when populating the X10SL7-F. Notes Be sure to use memory modules of the same type, same speed, same frequency on the same motherboard. Mixing of memory modules of different types and speeds is not allowed. Due to memory allocation to system devices, the amount of memory that remains available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. See the follow ing table for details. For Microsoft Windows users: Microsoft implemented a design change in the Windows XP with Service Pack 2 (SP2) and Windows Vista.
This change is spe cific to the behavior of Physical Address Extension (PAE) mode which improves driver compatibility. For more information, please read the following article at Microsoft’s Knowledge Base website at: http://support.microsoft.com/kb/888137.
5-8 DDR3 Unbuffered ECC (UDIMM) Memory DIMM Slots per Channel DIMMs Populat ed per Channel DIMM Type POR Speeds Ranks per DIMM (any combination) 2 1 Unbuffered DDR3 1333, 1600 Single Rank, Dual Rank 2 2 Unbuffered DDR3 1333, 1600 Single Rank, Dual Rank Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (-Available) (4 GB Total System Memory) Firmware Hub flash memory (System BIOS) 1 MB 3.99 Local APIC 4 KB 3.99 Area Reserved for the chipset 2 MB 3.99 I/O APIC (4 Kbytes) 4 KB 3.99 PCI Enumeration Area 1 256 MB 3.76 PCI Express (256 MB) 256 MB 3.51 PCI Enumeration Area 2 (if needed) -Aligned on 256-MB boundary- 512 MB 3.01 VGA Memory 16 MB 2.85 TSEG 1 MB 2.84 Memory available to OS and other applications 2.84