Chapter 5:
Advanced Motherboard Setup 5-11 Connector Description COM1/COM2 COM1 (Port)/COM2 (Header) Fan1 - Fan4, FanA System/CPU Fan Headers JF1 Front Panel Control Header JL1 Chassis Intrusion Header JLED1 Power LED Indicator Header JPI2C1 Power SMB (System Management Bus) JPW1 24-pin ATX Main Power Connector (Required) JPW2 +12V 8-pin CPU power Connector (Required) JSD1 SATA DOM (Device On Module) Power Connector _ JSTBY1 Standby Power Header JTPM1 Trusted Platform Module/Port 80 Connector LAN1/LAN2 Gigabit (RJ45) Ports (LAN1/2) IPMI LAN _ IPMI Dedicated LAN _ I-SATA0-1 (Intel PCH) SATA 3.0 Ports 0/1 (6Gb/sec) I-SATA 2-5 (Intel PCH) SATA 2.0 Ports 2~5 (3Gb/sec) L-SAS 0-7 SAS Ports 0-7 (supported by LSI 2308 SAS controller) (PCH) Slot 5 PCI-Express 2.0 x4 in x8 Slot (CPU) Slot 6 PCI-Express 3.0 x8 in x16 Slot SPKR1 Internal Speaker/Buzzer SW1 UID (Unit Identifier) Switch 6-SGPIO 1/2 Serial Link General Purpose I/O Headers for SAS Ports T-SGPIO 1/2 Serial Link General Purpose I/O Headers for SATA Ports USB 2/3, 4/5 Backpanel USB 2.0 Ports 2/3, 4/5 USB 0,1 (3.0) USB 3.0 Ports 0, 1 (USB 0:
Type A Connector) USB 8/9 Front Panel Accessible USB 2.0 Headers 8/9 VGA Backpanel VGA Port LED Description Color/State LE3 Standby Power LED On: Power On LE4 UID LED Blue (On): Unit Identified LE5 BMC Heartbeat LED Green (Blinking): BMC Normal LE6 Power Status LED Red: PWR Fail/Yellow: Standby PWR Active Green: PWR On Normal LEDS2 SAS LED Green (Blinking): SAS Active/Red (Solid On): SAS Error