S UPER S ERVER 1018D-73MTF User's Manual 5-8 Connector Definitions Power Connectors The 24-pin main power connector (JPW1) is used to provide power to the motherboard. The 8-pin CPU PWR connector (JPW2) is also required for the processor. These power connectors meet the SSI EPS 12V specification. See the tables on the right for pin definitions. NMI Button The non-maskable interrupt button header is located on pins 19 and 20 of JF1. Refer to the table on the right for pin definitions. Power LED The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin definitions. HDD LED The HDD LED connections are located on pins 13 and 14 of JF1.
Attach a cable here to indicate HDD activity. See the table on the right for pin definitions. 5-12 ATX Power 24-pin Connector Pin Definitions (JPW1) Pin# Definition Pin # Definition 13 +3.3V 1 +3.3V 14 -12V 2 +3.3V 15 COM 3 COM 16 PS ON _ 4 +5V 17 COM 5 COM 18 COM 6 +5V 19 COM 7 COM 20 Res (NC) 8 PWR OK _ 21 +5V 9 5VSB 22 +5V 10 +12V 23 +5V 11 +12V 24 COM 12 +3.3V Processor Power Pin Definitions (JPW2/JPW3) Pins Definition 1 through 4 Ground 5 through 8 +12V NMI Button Pin Definitions (JF1) Pin# Definition 19 Control 20 Ground Power LED Pin Definitions (JF1) Pin# Definition 15 +3.3V 16 Power LED HDD LED Pin Definitions (JF1) Pin# Definition 13 3.3V SB/UID Switch 14 HD Active