Supermicro 1018D-73MTF — SUPERSERVER 1018D-73MTF — User's Manual

S UPER S ERVER 1018D-73MTF User's Manual DOM PWR Connector The Disk-On-Module (DOM) power con­ nector (JSD1) provides 5V power to a solid state DOM storage device con­ nected to one of the SATA ports. See the table on the right for pin definitions. Standby Power The Standby Power header is located at JSTBY1 on the motherboard. See the table at right for pin definitions. Power SMB (I 2 C) Connector Power System Management Bus (I 2 C) Connector (JPI 2 C1) monitors power sup­ ply, fan and system temperatures. See the table on the right for pin definitions.

T-SGPIO 1/2 & 6-SGPIO 1/2 Headers Four Serial-Link General Purpose Input/ Output headers (T-SGPIO 1/2 & 6-SGPIO 1/2) are located on the motherboard. T-SGPIO 1/2 support the onboard SATA interface and 6-SGPIO 1/2 support the onboard SAS connections. See the table on the right for pin definitions. Note: NC = No Connection. 5-16 DOM PWR Pin Definitions Pin# Definition 1 5V 2 Ground 3 Ground Standby Power Pin Definitions Pin# Definition 1 +5V Standby 2 Ground 3 No Connection PWR SMB Pin Definitions Pin# Definition 1 Clock 2 Data 3 PWR Fail 4 Ground 5 +3.3V T-SGPIO/6-SGPIO Pin Definitions Pin# Definition Pin Definition 2 NC 1 NC 4 Data 3 Ground 6 Ground 5 Load 8 NC 7 Clock