Supermicro 1018D-73MTF — SUPERSERVER 1018D-73MTF — User's Manual

Chapter 5: Advanced Motherboard Setup Power Status LED A Power Status LED is located at LE6 on the motherboard. When the LED indica­ tor turns to color red, power supply has a problem. See the table at right for more information. SAS Heartbeat LED A SAS Heartbeat LED is located at LEDS2 on the motherboard. See the table at right for more information. 5-11 SAS/SATA Ports SATA/SAS Ports Two SATA 3.0 ports (I-SATA 0/1) and four SATA 2.0 (I-SATA 2-5) ports are located on the board. These SATA ports are supported by the Intel C222 PCH chip. In addition to SATA connections, eight SAS ports (L-SAS 0-7), supported the LSI 2308 SAS controller, are also located on the motherboard.

See the table on the right for pin definitions. 5-23 Power Status LED (LE6) Color Definition Green System Power On (Power Normal) Yel­ low Standby Power Active (System Off) Red System Power has a problem (Power Failure) SAS Heartbeat LED Status (LEDS2) Color/State Definition Green: Blinking SAS Active Red: Solid On SAS Error SAS/SATA Port Pin Definitions Pin # Definition 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground