S UPER S ERVER 1018D-73MTF User's Manual 5-10 Onboard Indicators LAN1/LAN2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Giga bit LAN port, the yellow LED indicates activity when blinking while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associated with the connection speed LED. IPMI Dedicated LAN LEDs In addition to the Gigabit Ethernet ports, an IPMI Dedicated LAN is also located above the rear USB ports 2/3 on the X10SL7-F. The yellow LED on the right indicates activity, while the LED on the left indicates the speed of the connec tion by its color.
See the table at right for more information. Onboard Power LED An Onboard Power LED is located at LE3. When this LED is on it means AC power is being supplied. Be sure to turn off the system and unplug the power cord before removing or installing components. See the table at right for more information. BMC Heartbeat LED A BMC Heartbeat LED is designated LE5. When LED1 is blinking, BMC func tions normally. See the table at right for more information.
5-22 LAN LED Connection Speed Indication LED State Definition Off No connection or 10 Mb/s Green 100 Mbps Amber 1 Gbps IPMI LAN Link LED & Activity LEDs LED State Definition Off No connection or 10 Mb/s Green 100 Mbps Amber 1 Gbps Onboard PWR LED Indicator LED Status Status Definition Off System Off On System on, or System off and PWR Cable Connected BMC Heartbeat LED Status LED State Definition Green: Blinking BMC: Normal