Chapter 4: Motherboard Connections SuperServer 1019S-M2 User's Manual 4.5 LED Indicators BMC Heartbeat LED A BMC Heartbeat LED is located at LED3 on the motherboard. When LED3 is blinking, the BMC is functioning normally. LAN LEDs Each of the Ethernet LAN ports has two LEDs. One LED indicates activity when flashing while the other Link LED may be green, amber, or off to indicate the speed of the connection. Onboard Power LED The Onboard Power LED is located at LED4. When this LED is on, i means power is present on the motherboard. Be sure to turn off the system and unplug the power cord before removing or installing components.
Dedicated IPMI LAN LEDs An IPMI LAN is also located on the rear I/O panel. The LED on the right indicates activity, while the LED on the left indicates the speed of the connection. Overheat/PWR Fail/Fan Fail LED A Overheat/PWR/Fail/ Fan Fail LED is located at LED2. Unit ID LED A rear UID LED (LED1) is located next to the I/O back panel. This UID indicator provides easy identification of a system unit that may be in need of service. Refer to the table for the LED status. 55 54 Onboard Power LED Indicator LED Color Definition Green: Blinking BMC:
Normal LAN Link LED LED State LED Color State Off No Connection/10 Mbps Green 100 Mb/s Amber 1 Gb/s Onboard Power LED Indicator LED Color Definition Off System Off (power cable not connected) Green System On IPMI LAN LED Color Status State Off Off No Connection Green: Solid Link/Speed (Left) 100 Mb/s Amber: Blinking Activity (Right) Active Overheat/PWR Fail/Fan Fail LED Indicator LED Color Definition Solid Overheat Blinking PWR Fail or Fan Fail UID LED LED Indicator LED Color Definition Blue: On Unit Identified